Ender-3 Prusa-i3 3D Printer RAMPS 1.4 RepRap VORON 2.4 3D Printer Mendel Prusa Arduino BIGTREETECH Mini12864 LCD Graphic Smart Display Control Board with Adapter and Cable

Price: $16.78

1. The Mini12864 display panel can handle 8 RGB, which is even cooler. It has an RGB multi-color lighting.

2. With an SD card base on the back, insert the file for slicing into the SD card, choose the file on the LCD, and print.

3. The product includes a file selection print and the ability to alter encoder parameters.

4. The RAMPS is plug-and-play, but the firmware needs to be changed to support it.

5.Don't worry about the after-sales issue; if you need anything, contact us, and we'll help you out.

Raspberry Pi 4/3/2/Zero/B/B+ Win11/10/8/7 (Non-Touch) 7 Inch 800x480 HDMI Portable Monitor IPS LCD Screen Display from HMTECH

Price: $39.99high quality lcd 240x128 supplier

Raspberry Pi Screen Monitor: The HMTECH 7-inch raspberry pi monitor is fully bonded and uses tempered glass. It has an IPS screen with an 800 * 480 resolution and a 178 degree viewing angle. Compared to VA and TN displays, the IPS panel color is accurate and exhibits more vibrant color and contrast. Portability & Plug-n-PlayThere is no need to install any drivers; all that is required is to connect the screen to the device through HDMI interface and power the USB port.For those who wish to use the screen for their own DIY projects, this is fantastic. The lightweight, portable HDMI monitor is simple to transport. Three Laptop Application ModesSecond screen mode, extend mode, and duplicate mode. Each mode brings ease and distinct use benefits.

Raspberry Pi Pico Bicool 2inch IPS LCD Display, 65K RGB Colors, 320 x 240 Pixels, SPI Interface, Embedded ST7789VW Driver

65K RGB colors, an IPS screen with a resolution of 320 x 240, and a vibrant display effect SPI interface, minimum IO pin requirements 4 user buttons make interaction simple. Operating voltage: 6 to 5.5 volts. The IPS Display Panel. Driver for ST7789VW. includes a documentation and development tools (including Raspberry Pi Pico C/C++ and MicroPython examples). 2.0-inch display size

wiredge QC5.0 PPS Super Fast Charging USB C to USB C Cable 5A PD 100W LED Display Cable 4ft Compatible with iPad and MacBook Type-C Phone Nylon Braided Charger Cord with 480Mbps Data Galaxy Pixel PS5 from Samsung

USB Type-C Cable, 100W The Qualcomm Quick Charge 5.0 protocol (2.0/3.0/4+), super fast charging 2.0, and PPS 45W/25W are all compatible with Type-C to Type-C cables. To enable quick charging, it features a 100 watt maximum output and USB 2.0 480Mpbs two-way data transmission speed. Please be advised that 4K rate is not supported. Cable for LED displays A built-in E-mark chip allows the USB-C to USB-C cable to accommodate high power and current (20 voltage/5 amp). This fast charger cord has a digital data display feature that allows you to see the charging status, the charging speed, and whether or not your phone is fast charging. Fast Charging USB Type-C Cord The USB C charging cable measures 4 feet (1.2 meters) long.

Temperature sensor, temperature sensor, and humidity, Pssopp Sensor Temperature Sensor Humidity Transmitter for Machine Equipment Wall Mount LCD Display

Clear Digital Display: An LCD screen allows you a clear digital display and more convenient operation, saving you time and labor. Reliable Work: The temperature meter has good durability thanks to its specialized analog circuit and 10–30V wide voltage input. Better Sensor: The transmitter's flexible application allows it to accurately measure temperature and humidity. Simple to Use: The buttons make it simple to set the parameters, and the effective dust protection guarantees a high level of work safety. Simple to Install: Both wall mount and slide rail installation are made easier by the low weight and small dimensions.

Dynamic Force Torque Sensor for Shaft Rotation at High Speed (0-200NM, 4-20mA Output) (DYN200)

Brushes and other non-contact parts need routine maintenance and part replacement. It reaches an index of greater than 1/10000, has outstanding zero point stability, and can measure with high precision thanks to its low torque. 0.00001 Nm is the beginning torque, which is extremely low. Accurate measurement is possible for all types of measurements, including static and high-speed torque measurements. There is no need for an external circuit because it can output standard voltage and current as well as RS485 communication to link to a PLC or specialized torque and speed instruments. LCD torque sensor display, Speed and power values