For the Arduino ESP8266 NodeMCU, HiLetgo ESP32 OLED WiFi Kit V3 Type-C ESP-32 0.96-inch blue OLED display WiFi+Bluetooth CP2012

Price: $18.89

A typical IoT development board is the WiFi kit 32. It is an ESP32-based solution with high levels of integration, including Wi-Fi and BLE. Power supply and charging for the ESP32-S3FN8 dual core processor using 3.7V lithium batteries USB Type-C.

With 1 joystick and 4 user buttons, the Bicool 1.3-inch LCD Display Module for Raspberry Pi Pico has a 240x240 resolution IPS screen in 65K RGB color. Simple Interaction

Price: $13.29

1.3-inch LCD display module for the Raspberry Pi Pico with an included ST7789 driver, 240x240 resolution on the SPI bus, an IPS screen, and 65K RGB colors for a vibrant and clear visual effect. 4-wire SPI interface, few IO pins needed Onboard 4 user buttons and 1 joystick for simple interaction includes a documentation and development tools (including Raspberry Pi Pico C/C++ and MicroPython examples).

Raspberry Pi 3 Model B RPi 1 B B+ A A+ SC5A Kuman 5 inch Resistive Touch Screen 800x480 HDMI TFT LCD Display Module with Touch Panel USB Port

5 inch resistive touch screen not compatible with Raspberry Pi Zero board and built for Raspberry Pi 3 2 Model B RPi 1 B B+ A A+. The touch capability is only available for Raspbian and Ubuntu systems, although the screen may be used with any regular HDMI device. This HDMI raspberry pi display has an 800 x 480 resolution. We designed a protective case for it, which you must construct. You can find the assembly instructions in the QA below, or you can email us for further information. The 5 inch display doesn't require an extra power source when used with the Raspberry Pi. This screen is powered and controllable using GPIO, and it can be displayed via HDMI. When it is...

For Arduino AVR PIC STM32, HiLetgo 2pcs 1.3" IIC I2C Serial 128x64 SSH1106 OLED LCD Display LCD Module

Price: $12.49

SSH1106 is the driver.Dimensions: 128 by 64 Installing four square holes is simple. Full screen lighted at a very low power of 0.08w The IIC address can be modified, making it simple to use with various machines. multiple control chip support fully compatible with the 51 series of Arduino, the msp430 series, the stm32/2 CSR IC, etc.

ideaspark 3Pcs 0.96" OLED Display 3-Colors 128x64 SSD1306 SPI IIC Serial LCD Screen Module Board with 4 Solder Pins Excellent Results using Arduino and Raspberry Pi

Price: $9.99

One yellow-blue OLED display, one white OLED display, one blue OLED display, ten female to female Dupont cables, and one storage box are included in the package. A 0.96-inch OLED module lets you display text and graphics on your microcontroller projects. Excellent for use with the Arduino UNO and Mega, Raspberry Pi, 51 MCU, STM 32, etc. 128 x 64 resolution > 160° of inclinationSupport voltage: 3.3V-5V DC, power consumption: 0.04W when operating normally, 0.08W when fully lighted SSD1306 is the embedded driver IC.I2C/IIC interface for communication, only two I/O ports required The display unit doesn't need a backlight and can be self-luminous. Even tiny fonts are readable because to its Super High Contrast, brilliant dots, and clear lines.

A pair of 0.91-inch I2C OLED display modules with blue I2C OLED screens for DC 3.3V - 5V

You will receive two OLED display modules with traditional display colors that are self-illuminating and do not require a backlight. Power-saving display: IIC (I2C communications) makes connections easier with less consumption, and the I2C OLED display outperforms the conventional LCD display in terms of performance; The I2C OLED display module does not include pin headers, so please be aware of that. Details include that this I2C LCD display works with 3.35V-powered Arduino, ESP8266, ESP32, STM32, and other microcontrollers; Temperature range for operation: -40 to 85 degrees Celsius; Dimensions: 128 x 32 Good compatibility: This I2C OLED display module works with the Raspberry Pi 4B/ 3B+/ 3B/ 2B/ Zero, Arduino, as well as the ESP8266, ESP32, STM32, and other microcontrollers. according to the directions in the product's handbookhigh quality 240x128 graphic lcd suppliers

For use with the Arduino R3 MEGA2560, ALMOCN 2 Pack IIC I2C TWI Serial 2004 20x4 LCD Display Module with I2C Interface Adapter Blue Backlight (2004 Blue).

Price: $15.99

High-quality LCD screen from 2004, IIC i2c adapter, 5V DC operating voltage, 60-99x-22 mm size. Display capability:I2C LCD 2004 shows four rows of characters, each having 20 characters. only requires two I/O ports for the IIC/I2C interface.VCC, GND, SDA, and SCL are the four pins that define a pin. Jumper control for the backlight is available, as is program control. Based on the well-known HD44780 controller, the LCD display module is compatible with the Arduino R3/Mega2560 board.

Hosyond 5 Pieces 0.96 Inch OLED I2C IIC Display Module 128x64 Pixel SSD1306 Mini Self-Luminous OLED Screen Board Compatible with Raspberry Pi

Price: $14.99

0.96 inch, 128 x 64 resolution, more than 160 degree view angle 3.3V-5V DC is the support voltage, Power usage: 0.04W while operating normally, 0.08W when the entire screen is lighted. SSD1306 is the embedded driver IC. I2C/IIC interface for communication, only two I/O ports required It is compatible with the Arduino Nano, Mega and R3 boards, Raspberry Pi, 51 MCU, STIM 32, and other boards. The display unit can be self-luminous and there is no need for a backlight. It has extremely high contrast, brilliant and clear dots, and even small fonts are simple to read. The OLED controller does not include any fonts; instead, users can generate their own fonts using font generating software.